KITECH School

1994 / Hanyang University / Bachelor's

1996 / POSTECH / Master's

2002 / POSTECH / Doctor's

The Improved DLR Wrist: Design and Analysis of 2-Degrees-of-Freedom Rotational Mechanism Using Spatial Antiparallelogram Linkages / ASME Journal of Mechanical Design / 2021

Design framework for a seamless smart glove using a digital knitting system / Fashion and Textiles / 2021

Robust Control for the Detection Threshold of CFAR Process in Cluttered Environments / Sensors /2020

공압 및 텐던 혼합 구동을 이용한 텐세그리티 로봇 시스템

접이식 하이브리드 구동 소프트로봇 기술을 활용한 협력 보조 로봇팔 개발

무인체계 알고리즘 기초 테스트 환경 구현 용역

모바일 매니퓰레이터를 활용한 장애물 회피 및 경로생성 기술 개발

생체모사 바이오닉 팔 메커니즘 개발

1980-84 / HANYANG UNIVERSITY / Bachelor's

1985-86 / University of Texas at Austin / Master's

1987-91 / University of Texas at Austin / Doctor's

1997 / Seoul National University / Bachelor's

1999 / POSTECH / Master's

2008 / The University of Tokyo / Doctor's

2012 / Harvard University / Doctor's

Automatic Image Alignment Using Principal Component Analysis / IEEE ACCESS / 2018

Development of a Wearable Robotic Positioning System for Noninvasive Transcranial Focused Ultrasound Stimulation / IEEE/ASME Transactions on Mechatronics / 2016

Automated motion artifact removal for intravital microscopy, without a priori information / Scientific Report / 2014

실감교류를 위한 비침습 뇌자극 시스템 개발

2003 / Seoul National University / Bachelor's

2009 / Seoul National University / Master's

2014 / Seoul National University / Doctor's

Anti-Islanding Detection Method Using Phase-Shifted Feed-Forward Voltage in Grid-Connected Inverter / IEEE Access / 2019

Moment of Inertia and Friction Torque Coefficient Identification in a Servo Drive System / IEEE Trans. Ind. Electron. / 2019

초대형 풍력처빈용 저고전압(LVRT/HVRT) 시험장비 및 계통연계 적합성 시험 기술 개발

에너지 라우터를 위한 시스템 운용 기술 개발

모듈형 3상 반도체 변압기 개발

연료전지 확산을 위한 대량 생산형 600w급 전력변환장치 기술개발

연료전지용 전력변환장치의 1st stage에 기 개발품(DC/DC 컨버터) 적용을 위한 성능분석

AC UPS 제어 알고리즘 선행 개발

MVDC 실시간 Test-bed 시스템 구축 및 제어모델 검증

로봇 전원측 1.8KW 급 PFC 개발

MV/LV 절연형 양방향 컨버터 단위모듈 토폴로지 설계 및 제어

반도체변압기용 다중 제어기 계층화 구조 연구 및 성능해석

유니콘 앰프 성능개선

3-level converter의 병렬 운전 제어

2005 / University of Michigan, Ann Arbor / Doctor's

Korea University / Bachelor's

Korea University, System&Control Lab. / Master's

Virginia Tech, RoMeLa Lab / Doctor's

Gait patern generation algorithm for lower‑extremity rehabiltation–exoskeleton robot considering wearer’s conditon / Inteligent Service Robotics / 2021

Analysis of the Positon Recogniton of the Bucket Tip Acording to the Motion Measurement Method of Excavator Bom, Stick and Bucket / SENSORS / 2020

Blade control in Cartesian space for leveling work by buldozer / AUTOMATION IN CONSTRUCTION / 2020

공연로봇을 위한 인간자세 추정방법 개선에 관한 연구 / 방송공학회 논문지 / 2020

효과적으로 기부를 받기 위한 인간형 로봇의 외형 디자인 및 행동에 관한 연구 / 로봇학회 논문지 / 2019

Development of Humanoid Robot 'CHARLI'

Team Leader of Team CHARLI and won RoboCup 2011 Humanoid League (Kids and Adults)

Air Kinetic Art를 위한 Balon형 드론 플랫폼 기술개발

기계학습을 이용한 휴머노이드 로봇의 인간모방형 이족보행법 개발

지능형 감성로봇을 이용한 체험형 전시 콘텐츠 개발

인간형 스키로봇 플랫폼 기술 개발

재난 음영지역에서 안정적인 망구성을 위한 재난통신 융합기술 연구

2014 / Seoul National University / Bachelor's

2016 / University of Michigan / Master's

2019 / University of Michigan / Doctor's

Power Guarantee for Electric Systems Using Real-Time Scheduling / IEEE Transactions / 2020

Mobile Device Batteries as Thermometers / ACM Proceedings / 2020

Thermal-A ware Scheduling for Integrated CPUs-GPU Platforms / ACM Transaction / 2019

2020년 스마트제조 고급인력양성

BK21 지속가능 스마트시티 융합인재 양성 교육연구단

Grand ICT 연구센터

디지털 제조장비 R&D 전문인력양성사업

Exploiting relaxation for battery health monitoring prognosis and optimization

Adaptive management of large energy storage systems for vehicle electrification

Thermal-aware management of cyber-physical systems

1998-02 / Dong-A University / Bachelor's

2000-02 / Pusan National University / Master's

2017-08 / Korea University / Doctor's

J.-H. Park, J.-H. Bae, and M.-H. Baeg/Adaptation Algorithm of Geometric Graphs for Robot Motion Planning in Dynamic Environments/Mathematical Problems in Engineering/2016-03-01

J.-H. Park, S.-D. Shin, J.-H. Bae, and M.-H. Baeg/Spatial Uncertainty Model for Visual Features Using a Kinect™ Sensor/Sensors/2012-06-26

J.-H.Park, J.-H.Bae, M.-H.Baeg/PLANNING METHOD FOR ROBOT MOTION/10-2017-0059735/2017-05-15

Development of AI-based CPS for utilization of robots in industrial applications

Development of construction and agricultural robot platform technology with autonomous system for all-wheel drive of 100kW class

Development of stabilization and sighting control SW for remote weapon systems of USV

Development of smart construction technologies for the robotic painting system in automobile factories

Development of robot arm and hand coordinated grasping/manipulation control technology for housework

Development of the disaster robot system using 3D perception technologies

Development of an universal gripper for industrial applications

Development of object recognition and grasping control

Development of control technology with sensor fusion based recognition for dual-arm work and the technology of manufacturing process with multi-robot cooperation

Development of the smart enviroment system for a cleaning robot

Development of a Tele-Service Engine and Tele-Robot Systems with Multi-Lateral Feedback

Development of the ROV system to improve the convenience of underwater works

● Feb. 1995/ BSc majoring Electronic Engineering, Yeungnam University

● Mar. 1997/ MSc majoring in System Engineering, Yeungnam University Graduate School

● Feb. 2019/ Ph.D in Electronic and Electrical, Sungkyunkwan University Graduate School

● Development of Robot Application Technology for improving Manufacturing Process of Ppuri/Bio/Chemicalindustry

● Development of standard model of robot-equipment for improving Manufacturing Process

● Development of biorobot inspection system to improve COVID-19 inspection process

● Development of Precision Robot core Technology for Products & technology transfer

● Demonstration Project for Industrial Robot Diffusion of Ppuri Industries (2023.01.01.~2024.04.30.)/ KIRIA

● Development & Demonstration of Industrial Robot Plus Process Model for Chemistry & Root Industries (2023.05.01.~2024.01.31.)/ KIRIA

● Development of Robot Application Technology for improving Manufacturing Process of Ppuri industry (2020.05.01.~2023.12.31.)/KEIT

● Development of Robot Application Technology for Improving Manufacturing Process of Bio & Chemical industry (2021.04.01.~2023.12.31.)/ KEIT

● Development of standard model of robot equipment digital manufacturing package for digital transformation of manufacturing process (2022.04.01.~2025.12.31.)/ KEIT

● 22㎾ class high power 10㎑ high speed processing predictive maintenance based OLED mask transfer robot controller servo motor and drive development (20221.04.01.~2024.12.31.)/ KEIT

● Development of biorobot inspection system to improve COVID-19 inspection process

(2022.12.01.~2024.04.30.)/Seegenemedical

● Development of Wafer Inspection System with High Speed Multi Probing (2016.12.01.~2021.11.30.)/ ISTK

1997-02 / Hanyang University / Bachelor's

2000-02 / Hanyang University / Master's

2006-02 / Hanyang University / Doctor's

B. R. So, H. Ryu, and B.-J. Yi, “ZMP-based Motion Planning Algorithm for Kinematically Redundant Manipulator Standing on the Ground,” Journal of International Service Robotics, Vols.8, pp.35-44, 2015. ISSN : 1861-2776 (SCIE)

B. R. So, and B.-J. Yi, “Comparison of Impulses Experienced in Walking on the Ground and Impulses Experienced on Treadmill,” International Journal of Control, Automation, and System, Vols.6, no.2, pp.243~252, 2008(SCIE)

W.S. Lee, B. R. So, Y,D, Lee, and C.W, Moon, "A new robotic horseback-riding simulator for riding lessons and equine-assisted therapy",INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC, Vols.15, no.4,pp.1~11,2018(SCIE)

Development of Soft Robotics Technology for Human-Robot Coexistence Care Robots

Development of Robot Manipulator for Capturing Space Debris

Development of Sensors Processing and Management System for a Smart Fish Farm

Next Generation Manufacturing Robot for Smart Factory and Work-Space Sharing with Human

2000-02 / Korea University / Bachelor's

2002-08 / Hanyang University / Master's

2015-08 / Hanyang University / Doctor's

Daehee Won, Wonhee Kim, Donghoon Shin, and Chung Choo Chung, "High-Gain Disturbance Observer-Based Backstepping Control With Output Tracking Error Constraint for Electro-Hydraulic Systems," IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2015.03.01., SCI

Daehee Won, Wonhee Kim, and Masayoshi Tomizuka, "High-Gain-Observer-Based Integral Sliding Mode Control for Position Tracking of Electrohydraulic Servo Systems," IEEE/ASME TRANSACTIONS ON MECHATRONICS, 2017.12.15., SCI

Daehee Won, Wonhee Kim, and Masayoshi Tomizuka, “Nonlinear Control with High Gain Extended State Observer for Position Tracking of Electro-hydraulic Systems,” IEEE/ASME TRANSACTIONS ON MECHATRONICS, 2020.4.13., SCI

Development of Deployable Mechanism and Robot-Arm based Payloads for Space Debris Capture

Development of robotic manipulator (EM) for on-orbit satellite servicing in space

Development of robot manipulator for capturing space debris

Development of industrial robot and post-processing robot application technology for Ppuri industry

Development of Core Technologies for a Working Partner Robot in the Manufacturing Field

2011-02 / Korea Advanced Institute of Science and Technology / Doctor's

2007-02 / Korea Advanced Institute of Science and Technology / Master's

2005-02 / Pusan National University / Bachelor's

Bummo Ahn and Jung Kim / Measurement and Characterization of Soft Tissue Behavior with Surface Deformation and Force Response under Large Deformations / Medical Image Analsis / 2010 (April)

Bummo Ahn, Jung Kim, Lorenzo Ian, Kun-Ho Rha, and Hyung-Ju Kim / Mechanical Property Characterization of Prostate Cancer Using a Minimally Motorized Indenter in an Ex-vivo Indentation Experiment / Urology / 2010

Bummo Ahn, Yeongjin Kim, Cheol Kyu Oh, and Jung Kim / Robotic Palpation based Abnormal Tissue Detection and Quantitative Analysis / Medical and Biological Engineering and Computing / 2012

Development of practical technology for concealed walking aids and formulation of business strategies

1981 / Seoul National University / Bachelor's

1983 / KAIST / Master's

1990 / Kyushu University / Doctor's

Cyclic elastic modulus and low cycle fatigue life of woven-type GFRP coated aluminum plates, Composites Part B, Vol.174 / 2019

Bending strength of CFRP laminated adhesive joints fabricated by vacuum-assisted resin transfer molding, Composites Part B, Vol.156 / 2019

Electrochemical degradation tests on a carbon-black-filled ethylene propylene diene monomer rubber under tensile strain, Proceedings of the Institution of Mechanical Engineers Part D: Journal of Automobile Engineering, Vol.232 / 2018

복합소재의 미소역학적 고강도 지능화에 관한 연구

열음향방출법을 이용한 복합재료의 미세손상검출 및 평가

보강알루미늄 사각관보의 국부적 굽힘좌굴특성에 대한 수치적 실험적 해석 및 평가

자동차용 고무부품의 노화메커니즘평가를 위한 미소시험분석기술의 개발과 구축

자동차용 냉각기 고무호스의 열화특성 규명을 위한 노화표피층의 미소분석 평가

무기나노입자를 첨가한 섬유강화 고분자 복합소재의 미소물성시험을 통한 내구성 및 강인성 향상에 관한 연구

2001 / Sogang University / Bachelor's

2003 / KAIST / Master's

2008 / KAIST / Doctor's

Development of design guideline with UHSS for enhancing forming quality in massive production members

Adaptive Structural Analysis with mesh-free technique

2007-10 / Seoul National University​ / Bachelor's

2010-12 / Seoul National University​ / Master's

2012-16 / Seoul National University​ / Doctor's

1999 / Korea Aerospace University / Bachelor's

2006 / Korea Aerospace University / Doctor's

Integrated Machine Vision System for Evaluating Hole Expansion Ratio of Advanced High-Strength Steels / 2022년도

Flow Stress of Ti-6Al-4V during Hot Deformation: Decision Tree Modeling / 2020년도

Development of feasibility evaluation platform for smart sensing unit

Manufacturing process data platform construction based on wearable

Development of blood flow limiting device for vascular intervention in cerebrovascular disease and manufacturing technology for its delivery system

2009.02. / Hanyang University / Bachelor's

2011.02. / Hanyang University / Master's

2017.02. / Hanyang University / Doctor's

“Understanding Piezoionic Effects in Chemo–Mechanical Energy Harvesting by Carbon Nanotube Yarn Twists” Advanced Energy Materials 14, 2303343 (2024)

“Integrated Electrostimulation Cell Culture Systems Driven by Chemically Modified Twistron Mechanical Energy Harvesting Electrodes” Advanced Functional Materials (2024, Front cover)

“Structural criticality manifested by a polarized ionic layer on a MWCNT yarn surface under mechanical loading” Carbon 218, 118708 (2024)

“Carbon nanotube yarn with small outer diameter to maximize the electrochemical performance of artificial muscles” Carbon 220 118775 (2024)

“Unveiling Ion Dynamics in the Electric-Double Layer Under Piezoionic Actuation of Chemo-Mechanical Energy Harvesters” Advanced Energy Materials 2402216 (2024)

“Recent advances in carbon nanotube‐based energy harvesting technologies” Advanced Materials 35, 2303035 (2023)

“Chemo‐Mechanical Energy Harvesters with Enhanced Intrinsic Electrochemical Capacitance in Carbon Nanotube Yarns” Advanced Science 9, 2203767 (2022)

“In-plane thermal conductivity of multi-walled carbon nanotube yarns under mechanical loading” Carbon 184, 452 (2021)

“Sheath-Run Artificial Muscles” Science 365, 150 (2019)

“Harvesting electrical energy from carbon nanotube yarn twist” Science 357, 6353 (2017)

“Harvesting temperature fluctuations as electrical energy using torsional and tensile polymer muscles” Energy&Environmental Science 8, 3336 (2015)

“Artificial muscles from fishing line and sewing thread” Science 343, 868 (2014)

Electrochemical Self-Energy Harvesting and Applications

Development of IoT wireless sensing module based on self-generation in the ocean

Electrochemical Self-Energy Harvesting and Applications

Development of Soft Robotics Technology for Human-Robot Coexistence Care Robots

Hyper-performance Artificial Muscles Based on Hybrid Supercoils

1988-92 / Hanyang University / Bachelor's

1998-94 / KAIST / Master's

1994-99 / KAIST / Doctor's

Jongsub Choi, Chang Hee Han et. al., Methodology for assessing the contribution of knowledge services during the new product development process to business performance, forthcomming in Expert Systems with Applications, (Available online from August. 2020)

Chang Hee Han, et. al., Smart Pricing in Action: The Case of Asset Pricing for a Rent-a-Car Company, Asia Pacific Journal of Information Systems Vol. 29 No. 4 (December 2019)

스마트 안전 리빙랩 퍼실리테이터 양성 교육체계 개발

스마트안전 리빙랩 포털시스템 기능 고도화 및 공간운영 매뉴얼 개발

의료용 3D프린팅 응용 사업 세부 모델 및 경제성 분석 용역

과학기술 지식인프라 통합서비스 성과 분석

스마트안전 리빙랩 운영 평가 분석 프로세스 설계 및 포털시스템 기획 연구

1996 / Hanyang University / Bachelor's

2001 / Georgia Institute of Technology / Master's

2005 / Georgia Institute of Technology / Doctor's

A Multi-Item Replenishment Problem with Carbon Cap-And-Trade under Uncertainty(2020). Sustainability

Gated Recurrent Unit with Genetic Algorithm for Product Demand Forecasting in Supply Chain Management(2020). Mathematics

주문생산 방식의 생산계획 수립을 위한 시뮬레이션 모델 설계: 판유리 제조 공정을 중심으로(2019). 산업경영시스템학회지

공간정보 마이데이터 거래소 활용 모델 및 사업화 전략수립(한국국토정보공사 공간정보연구원)

4차산업혁명시대 중소기업 컨설팅 선도인력 양성을 위한 IC-PBL(Industry Coupled Problem Based Learning) 교육 방법 연구(한국연구재단)LX 미래 스마트시티 서비스사업화 모델수립 및 제도개선 방안 연구(한국국토정보공사 공간정보연구원)

Hanyang University / Bachelor's

POSTECH / Master's

The Pennsylvania State University / Doctor's

kilseung Ahn, Minuk Kim, Sun Hur, Dongmin Shin, "Using a Graphical Model to Diagnose Product Defects with Partially Shuffled Equipment Data," International Conference on Computers & Industrial Engineering, 2019

Development of Simulator for Human-Machin Cooperative Manufactuing Systems

Prognostics and Health Management (PHM) for Preventing Defective Products

Validation and Dissemination of ICT-converged Manufacturing Services

1985-89 / Hanyang University / Bachelor's

1991-93 / Osaka University / Master's

1993-96 / Osaka University / Doctor's

Hybridized conducting polymer chemiresistive nano-sensors, nanotoday

Estimation of dispersion stability of UV/ozone treated multi-walled carbon nanotubes and their electrical properties, Carbon

Adhesion enhancement of ink-jet printed conductive copper patterns on a flexible substrate, J. Mater. Chem.

[산업체]PTC 복합 면상 발열체 전극 표면 개질 및 안정화

전기 자동차 ECU 유닛용 질화 붕소계 필러를 응용한 15W 급 등방성 고방열 복합 소재 개발

AAO를 이용한 DRAM 프로브카드용 MLA 기판 및 AP 프로브카드용 가이드플레이트 개발

고직접 반도체 증착식각공정 장비용 고내식성 세라믹 ALD 전구체 및 핵심 부품 개발

[산업체]탄소소재 기반 고발열 페이스트 개발

1999-02 / Yonsei University / Bachelor's

2003-09 / KAIST / Doctor's

2009 / 인하대학교 / Bachelor's

2011 / KAIST / Master's

2015 / KAIST / Doctor's

Multi-porous electrode derived from zeolitic imidazolate framework-8 coating through continuous two-stage heat treatment for vanadium redox flow batteries / Journal of Energy Storage / 2024

Vanadium Redox Flow Battery Using an N-Doped Porous Carbon-Coated Positive Electrode Derived from Zeolitic Imidazolate Framework-8-Coated Graphite Felt / International Journal of Energy Research / 2024

Superior electrocatalytic negative electrode with tailored nitrogen functional group for vanadium redox flow battery / Journal of Energy Chemistry / 2023

Application of recycled Si from industrial waste towards Si/rGO composite material for long lifetime lithium-ion battery / Journal of Power Sources / 2021

Cubic garnet solid polymer electrolyte for room temperature operable all-solid-state-battery / Journal of Materials Research and Technology / 2021

High-Power Vanadium Redox Flow Battery Based on N-S-Dual Functionalized Graphite Felt / Journal of The Electrochemical Society / 2020

2010 / Korea University / Bachelor's

2012 / Korea Advanced Institute of Science and Technology (KAIST) / Master's

2018 / Korea Advanced Institute of Science and Technology (KAIST) / Doctor's

Rendering strategy to counter mutual masking effect in multiple tactile feedback / Advanced Sciences / 2020

Braille display for portable device using flip-latch structured electromanetic actuator / IEEE Transactions on Haptics / 2020

Mechanical vibration influences the perception of electrovibration / Scientific reports / 2018

Development of robotic technology of mobile manipulation capable of recognizing and grasping objects for unmanned dish collection service

Development of teaching-less product assembly system for smart factory based on autonomous robot task planning and manipulation

Development of a shared autonomy control framework based on deep reinforcement learning for a dexterous dual manipulation in unstructured environment

2005 / Sookmyung women’s University/ Bachelor's

2010 / University of Georgia / Master's

2014 / North Carolina state University / Doctor's

Enhancing indoor air quality via MIL-100(Fe) growth on polyacrylonitrile@TiO2 nanofiber webs for adsorption of volatile organic compounds/Chemical Engineering Journal/2024

Innovative tarantula hair-inspired washing machine filters for enhanced microfiber capture/Science of the Total Environment/2024

Nano/microplastics in indoor air: A critical review of synthesis routes for toxicity testing and preventative measure strategies, Process safety and environmental protection/2023

One-step fabrication process of green resin toughened with electrospun epoxidized natural rubber fibers/ ACS sustainable Chemistry and Engineering/ 2018

Self-healing properties of protein resin with soy protein isolate-loaded poly(d,l-lactide-co-glycolide) microcapsules /Advanced Functional Materials/ 2016

Identification of microplastic generation characteristics and development of pollution reduction technology

In situ growth of cyclodextrin-based metal organic frameworks on fibers

Biomimetic smart self-healing biopatch for cell regeneration

2004 / Yonsei University / Bachelor's

2006 / Yonsei University / Master's

2010 / Yonsei University / Doctor's

An Empirical Investigation of Customer Loyalty in Chinese Smartphone Markets with Large-Scale Data: Apple, Samsung, and Xioami Cases / 2020

Third-Party Mobile App Developers’ Continued Participation in Platform-Centric Ecosystems: An Empirical Investigation of Two Different Mechanisms / 2016

The Mediating Role of Psychological Breach in IS Outsourcing: Inter-firm Governance Perspective / 2013

Virtual collaboration of distant online shoppers / 2011-2014

2004 / Seoul National University / Bachelor's

2006 / Seoul National University / Master's

2012 / North Carolina State University / Doctor's

J.-H. Kim, S. Kim, M. D. Dickey, J.-H. So*, H.-J. Koo, “Interface of gallium-based liquid metals: oxide skin, wetting, and applications”, Nanoscale Horizons, 9, 1099, 2024

M.-Y. Choi, J.-H. Kim, S.-K. Kim, H.-J. Koo, J.-H. So, “Textile-Based Stretchable Supercapacitors with Liquid Metal Current Collectors”Adv. Mater., 34, 2310318, 2024

Y. Lee, J.-H. So, H.-J. Koo*, “A Transparent Hydrogel-Ionic Conductor with High Water Retention and Self-Healing Ability”, Materials, 17, 288, 2024

Y. R. Kwon, H. C. Kim, J. S. Kim, J.-H. So, Y.-W. Chang, D. H. Kim, “Semi-IPN superabsorbent polymer based on itaconic acid and polyvinyl alcohol with improved gel strength and salt resistance”, Polymer Eng. Sci., 63, 1943, 2023

H.-C. Kim, Y.-R. Kwon, J.-S. Kim, J.-H. So, D. H. Kim, “Dual-Cure Adhesives Using a Newly Synthesized Itaconic Acid-Based Epoxy Acrylate Oligomer”, Polymers, 15, 3304, 2023

Y. Lee, K. Akyildiz, C. Kang, J.-H. So, H.-J. Koo, “The Dielectrophoretic Alignment of Biphasic Metal Fillers for Thermal Interface Materials”, Polymers, 15, 4653, 2023

J.-H. Kim, S. Kim, H. Kim, S. Woo, J. Cho, M. D. Dickey, J.-H. So*, H.-J. Koo*, “Imbibition-induced selective wetting of liquid metal”, Nat. Commun. 13, 4763, 2022

K. Akyildiz, J.-H. Kim, J.-H. So*, H.-J. Koo*, “Recent progress on micro- and nanoparticles of gallium-based liquid metals: From preparation to applications, J. Industrial Eng. Chem., 116, 120, 2022

Y.-R. Kwon, H.-C. Kim, J.-S. Kim, J.-H. So, Y.-W. Chang, D.-H. Kim*, “Enhanced Mechanical and Thermal Properties of Chain-Extended Waterborne Polyurethane Coatings with Cellulose Acetate Butyrate”, Polymers, 14, 4062, 2022

M. Jang, H.-D. Kim, H.-J. Koo, J.-H. So*, “Textile-Based Wearable Sensor for Skin Hydration Monitoring”, Sensors, 22, 6985, 2022

M.-Y. Choi, M. Lee, J.-H. Kim, S. Kim, J. Choi, J.-H. So*, H.-J. Koo*, “A Fully Textile-based Skin pH Sensor”, J. Industrial Textiles, 51(1), 441S, 2022

J.-H. Kim†, Y.-J. Park†, S. Kim, J.-H. So*, H.-J. Koo*, “Effect of Surrounding Solvents on Interfacial Behavior of Gallium-Based Liquid Metal Droplets”, Materials, 15(3), 706, 2022

J.-H. Kim, D.-H. Kim, J.-H. So*, H.-J. Koo*, “Toward Eco-Friendly Dye-Sensitized Solar Cells (DSSCs): Natural Dyes and Aqueous Electrolytes”, Energies, 15(1), 219, 2022

Y.-J. Park†, J.-H. So†, Y. Kim†, J.-H. Kim, S. Kim, W. Choi, S. T. Chang, H.-J. Koo*, “Alcohol-sensing Microfiber: Dependence of Conductance of a Hydrated Composite Fiber on Normal Aliphatic Alcohol”, Chem. Eng. J., 430, 132681, 2022

J.-H. Kim†, J.-H. So†, S.-K. Kim, H. Yoon, J. Choi, H.-J. Koo*, “Facile Fabrication of Polyaniline Films with Hierarchical Porous Networks for Enhanced Electrochemical Activity”, J. Ind. Eng. Chem., 86, 81, 2020

Y.-J. Park, S. Lee, B. Kim, J.-H. Kim, J.-H. So*, H.-J. Koo*, “Impedance Study on Humidity Dependent Conductivity of Polymer Composites with Conductive Nanofillers”, Composites Part B: Engineering, 202, 108412, 2020

J. H. Lee, P. A. Dzagbletey, M. Jang, J.-Y. Chung*, J.-H. So*, “Flat Yarn Fabric Substrates for Screen-Printed Conductive Textiles”, Adv. Eng. Mater., 22(12), 2000722, 2020

R. Aprilliyani, P. A. Dzagbletey, J. H. Lee, M. J. Jang, J.-H. So*, J.-Y. Chung*, “Effects of Textile Weaving and Finishing Processes on Textile-Based Wearable Patch Antennas”, IEEE Access, 8, 63295, 2020

“Development of 600 mm low-warpage backside protection film materials and process technologies”, 2024-2027

“Development of High-Speed RT-PCR Systems Utilizing Liquid Metal Composites”, 2024-2027

“Battery Management System for Flight Range Optimization and Stability Enhancement of AAM Aircraft with Non-intrusive Sensor Fusion and Battery Diagnosis Technology”, 2024-2027

“Development of E-textile connection technology using liquid metal”, 2022-2023

“Low Cost Production of Large Surface Textile Based Antennas”, 2018-2021

2012/ Hanyang University / Bachelor's

2014 / KAIST / Master's

2018 / KAIST / Doctor's

1. Arc plasma deposited Co single atom catalysts supported on aligned carbon nanofiber for hydrogen peroxide electrosynthesis and an electro-Fenton process, Carbon Energy / 2024

2. Hierarchically porous hydrogel electrolyte prepared from interpenetrating polymer networks for flexible Zn-Air batteries, Energy Storage Materials / 2023

3. Multi-Scale Nanofiber Membrane Functionalized with Metal-Organic Frameworks for Efficient Filtration of Both PM2.5 and CH3CHO with Colorimetric NH3 Detection, Chemical Engineering Journal 2023

4. Perpendicularly Stacked PTFE Framework as a Reinforcement for Highly Durable Composite Membrane in Proton Exchange Membrane Fuel Cells, Nano Energy / 2022

5. Template-Assisted Synthesis of Single-Atom Catalysts Supported on Highly Crystalline Vanadium Pentoxide for Stable Oxygen Evolution, Chem Catalysis / 2022

6. Black Tungsten Oxide Nanofiber as a Robust Support for Metal Catalysts: High Catalyst Loading for Electrochemical Oxygen Reduction, Small / 2021

7. Hierarchically Assembled Cobalt Oxynitride Nanorods and N-doped Carbon Nanofibers for Efficient Bifunctional Oxygen Electrocatalysis with Exceptional Regenerative Efficiency, ACS Nano / 2021

8. High-yield electrochemical hydrogen peroxide production from enhanced two-electron oxygen reduction pathway by mesoporous nitrogen-doped carbon and manganese hybrid electrocatalysts, Nanoscale Horizons / 2020

9. Post-assembly Modification of Polymeric Composite Membrane using Spin Drying for Fuel Cell Applications, Journal of Materials Chemistry A 2019

10. Mussel-Inspired Polydopamine Treated-Reinforced Composite Membranes with Self-Supported CeOx Radical Scavengers for Highly Stable PEM Fuel Cells, Advanced Functional Materials / 2019

1. Korea-Sweden Advanced Textile Energy Materials Innovation Center (2023.07~2028.12)

2. Development of active hybrid filter system for airborne molecular contaminations (2022.09~2025.02)

3. Development of weavable zinc-air battery fibers for realizing completed smart textronics (2022.06~2025.02)

2009 / Ajou Univ. / Bachelor's

2016 / Ajou Univ. / Doctor's (Integrated Masters with Ph.D. Program)

Systematic usability evaluation on two harnesses for a wearable chairless exoskeleton / 2021

A Case Study On Consumer Evaluation Test Under Quasi-Real Environment (Living Lab) / 2017

Usage Trends of Open Access and Local Journals: A Korean Case Study / 2016

Infrastructure development of manufacturing and service convergence using field data

Development of Environmental and Skin Friendly Bio-Materials and Products for White Bio-Industry

Development of Living Lab Infrastructure for empirical test of new product and service in Convergence Smart Safety

2009 / Hanyang University / Bachelor's

2015 / Hanyang University / Doctor's

▸Fabrication of composite microbeads consisting of cellulose and covalent organic nanosheets via electrospray process, Cellulose, 2024

▸Surface grafting of a zwitterionic copolymer onto a cellulose nanofiber membrane for oil/water separation, Cellulose, 2023

▸Closing the Sustainable Life Cycle Loop of Membrane Technology via a Cellulose Biomass Platform, ACS Sustainable Chemistry&Engineering, 2022

▸Thiol-functionalized cellulose nanofiber membranes for the effective adsorption of heavy metal ions in water, Carbohydrate Polymers, 2020

▸Thiol-Based Chemistry as Versatile Routes for the Effective Functionalization of Cellulose Nanofibers, Carbohydrate Polymers, 2020

▸Development of fiber-based technology for reduction of hazardous substances in the air

▸Development of active hybrid filter system for airborne molecular contaminations

▸High strength functional nanofiber-hybrid yarn exhibiting maximized surface area and its application for rare metal adsorption with high efficiency

▸Development of low-cost, recyclable block (panel) molding process with fiber waste

1999 / Seoul National University / Bachelor's

2001 / Seoul National University/ Master's

2005 / Seoul National University / Doctor's

1. Integrated electrostimulation cell culture systems driven by chemically modified twistron mechanical energy harvesting electrodes, Advanced Functional Materials, 2315279/2024

2. Bioaccumulation, microbiome composition and immunity, and epigenetic signatures associated with exposure to spherical, fibrous, and fragmented microplastics in the mussel Mytilus galloprovincialis, Journal of hazardous materials 462, 132691/2024

3. In-situ ionic crosslinking of 3D bioprinted cell-hydrogel constructs for mechanical reinforcement and improved cell growth, Biomaterials advances 147, 213322/2023

4. Comprehensive feasibility evaluation of small-diameter 3D templated vascular graft via physical characterizations and in-vivo experiments, Biomedical materials 18(5) 055018/2023

5. 3D bioprinted complex constructs reinforced by hybrid multilayers of electrospun nanofiber sheets, Biofabrication 11(2) 025015/2019

6. PolySTAT-modified chitosan gauzes for improved hemostasis in external hemorrhage, Acta Biomaterialia 31, 178-185/2016

1. Development of multifunctional mat and tubular therapeutic materials based on electrospun extracellular matrix (ECM) nanofibers (National Research Foundation of Korea)

2 Establishment of demonstration and product approval support system for regeneration and reconstruction industrial technology (Ministry of Trade, Industry and Energy)

3. Development of design software and 3D printing based manufacturing process for customized freeform artificial vascular graft (Ministry of Science and ICT)

4. Development of convergence solution for environment contamination issues of secondary microplastics (Ministry of Science and ICT)

5. Development of electro-megneto-mechanical training system to generate multiple characteristics in polymer based engineered (Ministry of Health and Welfare)

6. Development of Bacteria Adsorbing Dressings with Enhanced Wound Healing Activity (Ministry of Trade, Industry and Energy)

7. Development of Personalized Production System for Musculoskeletal Tissue Regeneration (Ministry of Economy and Finance, KITECH)

8. Development of Robot Application Technology for Improving Manufacturing Process of Bio & Chemical Industry (Ministry of Trade, Industry and Energy)

1993 / Yeung-Nam University / Mechanical Engineering / Bachelor's

2000 / Yonsei University / Mechanical Engineering / Master's

2010 / Seong Gyun Kwan University / Mechanical Engineering / Doctor's

Research on the development of a living lab framework for new convergence product service improvement support and certification support / 2018

Development of combustible gas leak detector / 2017

Development of a New Automatic Control System for the Harmonics Analysis of Distribution Transformers / 2016

A case study on Consumer Evaluation Test under quasi-real environment / 2017

Development of high-speed multi-probing wafer inspection system / 2016

Development of verification technology for convergence new product suitability certification standards / 2019

Establishment of foundation for future transportation user experience lab promotion / 2021

Establishment of a living lab foundation for new convergence products and services in the smart safety field / 2021

Electric two-wheeled vehicle battery sharing station technology development and demonstration / 2023

2009 / Pusan National University / Bachelor's

2011 / Pusan National University / Master's

2016 / KAIST / Doctor's

Spin-exchange carrier multiplication in manganese-doped colloidal quantum dots, Nature Materials, 22, 1013 / 2023

High-efficiency photoemission from magnetically doped quantum dots driven by multi-step spin-exchange Auger ionization, Nature Photonics, 16, 433 / 2022

Control of Charge Dynamics in Z-scheme Photocatalysts for Green Hydrogen Production (Ministry of Science and Technology, 2022-2025)

Development of Sustainable Clean Hydrogen Production Technology Using Biogas (Cosmo Catalyst Co., Ltd., 2024-2025)

Preliminary Research on the Development of a Liquid Metal Reaction System for CO2 Conversion and High-Purity CO Production Technology (NST, 2023-2024)